Two-component epoxy primer with high metallic zinc content providing exceptional cathodic protection to steel substrates. Forms a tough, conductive coating that sacrificially protects the metal surface. Excellent corrosion resistance in aggressive environments including marine, offshore, and industrial atmospheres.

Product Name	Zinc Rich Epoxy ZRE 90
Resin Type	Epoxy Polyamide / Epoxy Amine
Zinc Content	>90% by weight in dry film
Volume Solids (%)	65 ± 2%
DFT per coat (microns)	50-100
Mix Ratio	3:1 (Base:Hardener)
Packaging	20L | 5L | 1L Kits
Overcoating Interval	Minimum 4 hours @ 30°C
Certification	ISO 12944 / NORSOK compliant

Enquire Now →

Two-component epoxy primer incorporating zinc phosphate as an active anti-corrosion pigment. Provides excellent barrier protection and passivation of the metal surface. Cost-effective primer with good adhesion and corrosion resistance for general industrial applications.

Product Name	Zinc Phosphate Epoxy ZPE 70
Resin Type	Epoxy Polyamide / Epoxy Ester
Anti-Corrosive Pigment	Zinc Phosphate
Volume Solids (%)	60 ± 2%
DFT per coat (microns)	50-75
Mix Ratio	4:1 (Base:Hardener)
Packaging	20L | 5L | 1L Kits
Key Feature	Good adhesion, cost-effective protection

Enquire Now →

Traditional alkyd-based metal primer formulated with red oxide pigments for basic corrosion protection. Provides good wetting and penetration on steel surfaces. Economical primer for interior and mild exterior environments where maximum corrosion resistance is not required.

Product Name	Red Oxide Primer ROP 50
Resin Type	Long Oil Alkyd
Pigment Type	Red Iron Oxide / Extenders
Volume Solids (%)	45 ± 2%
DFT per coat (microns)	40-60
Application Method	Brush, Roller, Conventional Spray
Packaging	20L | 5L | 1L
Drying Time	2-4 hours to touch @ 30°C

Enquire Now →